WORKSHOP
Machinery and production capacity
VALKENBURG AAN DE GEUL
- 10,000-m² [107,500 sq ft] production area equipped for processing and assembling heavy steel structures with an annual production capacity of 8,000 tons
- 2,000-m² [21,500 sq ft] anti-corrosion treatment department, modern blasting chamber and in-house spraying facility
- 1,500-m² [16,100 sq ft] assembly, test rig and logistics facility The production area has several overhead/gantry cranes with a maximum lifting capacity of 12.5 tons per crane. 10,000-m² [107,500 sq ft] production area at Frijns Steel Construction in Valkenburg aan de Geul:
10,000-m² [107,500 sq ft] production area
- StruCAD-controlled Voortman punching and shearing system for flat and angle processing
Voortman punching and shearing machine
- SATO oxy-fuel cutting system with a 6000 × 2000 mm [19.7 × 6.6 ft] table
SATO oxy-fuel cutting machine
- Behringer band saw for beam sections up to 700 × 500 mm [27.5 × 20 in]
Behringer band saw
- Lincoln Electric submerged arc-welding system for producing composite beams, e.g. symmetric and asymmetric hat-section, castellated and SFB girders.
- 25 × MIG/MAG welding units (400/500 A)
- Various folding machines, shears, stationary drills and sheet metalworking machines
Lincoln Electric submerged arc-welding system
- Fully automated Voortman three-axis drilling system for sections up to 1000 mm [40 in] wide Our machine is controlled by StruCAD stations located in the Engineering department.
Voortman three-axis drilling system
